ELSKY M415F Industrial Motherboard

SKU: ELSKY-M415F

CPU

Supports Intel Gemini Lake Refresh J and N series CPUs (e.g. J4125)

Size

170mm (L) x 170mm (W) x 22mm (H)

Memory

1 x NB-DDR4 (Max 16GB)

Storage

1 x MSATA interface, 1 x SATA1 interface

Network

Gigabit: Single-port 8111H; 100 Mbps: Single-port 8106E

Display

VGA or DP, HDMI, LVDS (or EDP); supports synchronous/asynchronous dual-display output

Power Supply

DC 12V (recommended 5A or higher)

Interfaces

DC-in, HDMI, VGA (or DP), 2 x USB 3.0, 2 x USB 2.0, 2 x LAN, Line-Out, Mic-in

Model	CPU	COM	4K	LAN	USB2.0	USB3.0	SSD	Memory	Power
M415F	Support Intel Gemini Lake Refresh J and N series CPU (for example：J4125）	10C/6C/2C optional	support	1LAN	8*USB2.0	2*USB3.0	1MSATA 1SATA 3.0	1*NB-DDR4 16G（MAX）	+12V
				2LAN	6*USB2.0	2
Realtek sound card single network motherboard defaults to 10USB; USB Sound Card Single Network Motherboard Default 9USB

Size	170mm(L)170mm(W)22mm(H)
CPU	Intel ® Processor: Celeron J4025/J4125/N4020/N4120, Pentium J5040/N5030
Memory support	1*NB-DDR4 SODIMM memory slot, supports single channel 2400MHz memory, low voltage 1.2V, maximum support 16GB
Power supply	1*DC_JACK	Supports 12V voltage, with a DC head inner diameter of 2.5mm The full load power consumption of the motherboard is about 30W. Suggest using a 12V/4A or higher power supply
Power supply	1*DC_PWR
Display function	Intel ® Ultra HD graphics card 600 graphics controller, supporting single display, dual display/triple display copying, dual display/triple display expansion, single display under DOS
	1*VGA DB15 interface	Supports a resolution of 1920*1080@60Hz
	1*DP interface(optional)	4K resolution 4096/3840*2160@60Hz
	VGA interface can be changed to support DP interface
	1*HDMI 2.0 interface	4K resolution 4096/3840*2160@60Hz
	1*HDMI_CON1 Pin	4K resolution 4096/38402160@30Hz （16Pin，28Pin，2.0mm）
	1*LVDS/EDP Pin	Supports a resolution of 1920* 1080@60Hz （30Pin，2*15Pin，2.0mm）
	1*LVDS_PWR Pin	LVDS voltage control pin （6Pin，2*3Pin，2.0mm）
	1*INVERT Pin	LVDS backlight switch control pin （6Pin，1*6Pin，2.0mm）
	LVDS and EDP are two options, using a total of one set of pins
Network function	1/2*RJ45 LAN interface	Gigabit network card and 100Mbps network card are optional, supporting network wake-up and PXE diskless boot function Gigabit: default single network Realtek 8111H; Optional Yutaiwei YT6801; Dual network: Realtek 8111H+Realtek 8111H or Yutaiwei YT6801+Yutaiwei YT6801; 100Mbps: Single network Realtek 8106E; Dual network Realtek 8106E+Realtek 8106E;
Network function	1*MINI_PCIE interface	Supports WIFI/3G/4G/Bluetooth modules
Hard disk function	1*SATA interface	Standard SATA 3.0 hard drive interface
	1*MSATA interface	Support MSATA 3.0
	1*SATA_PWR Pin	Support MSATA 3.0 （4Pin，1*4Pin，2.54mm）
Sound function	Default support for Realtek ALC662/897 HD digital audio decoder and 6-channel high fidelity audio controller Optional support for Cmedia HS-100B high fidelity USB audio chip
	1*LINE_OUT interface	Supports audio output (green)
	1*MIC_IN interface	Supports microphone input (red)
	1*JAMP Pin	The amplifier supports dual channel output with 8 ohms and 5 watts speakers （4Pin，1*4Pin，2.0mm）
	1*F_AUDIO Pin	Standard audio pin （9Pin，2*5Pin，2.54mm）
	1*SPDIF_OUT Pin	digital audio interface
USB function	2*USB3.0 interface	Rear standard USB 3.0 interface
	2*USB2.0 interface	Rear standard USB 2.0 interface
	1*F_USB1 Pin	Front USB 2.0 pins, one set with 2 * USB 2.0 （9Pin，2*5Pin，2.54mm）
	1*F_USB2 Pin	Front USB 2.0 pins, one set with 2 * USB 2.0 （9Pin，2*5Pin，2.54mm）
	1*F_USB3 Pin	Front USB 2.0 pins, one set with 2 * USB 2.0 （9Pin，2*5Pin，2.54mm）
	Front USB 2.0 pins, one set with 2 * USB 2.0
SWITCH	1*F_PANEL Pin	Switch, power light, hard disk light, restart pin （9Pin，2*5Pin，2.54mm）
SWITCH	1*AUTO-SW Pin	Support hardware control for power on and startup （3Pin，1*3Pin，2.0mm）
Other I/O	10*COM Pin	Serial port, supports RS232 by default, optional RS232/RS422/RS485 for COM1/3/4（9Pin，2*2.54mm）
	1*JPCOM1/2/3 Pin	Can control the ninth pin voltage of COM1/2/3 to 0V/5V/12V （6Pin，2*3Pin，2.0mm）
	1*JLPT1 Pin	Parallel port, standard printing interface pins （25Pin，2*13Pin，2.0mm）
	1*SIM Card Slot	Supports SIM card, SIM card is required when using 3G/4G
	1*CLR_CMOS Pin	Motherboard reset and discharge pins （3Pin，1*3Pin，2.54mm）
	1*FAN1 Pin	CPU fan pin, does not support temperature control（3Pin，1*3Pin，2.54mm）
	1*FAN2 Pin	System fan pin, does not support temperature control （3Pin，1*3Pin，2.54mm）
	1*J_GPIO Pin	GPIO control pin （10Pin，2*5Pin，2.54mm）
Operating environment	Working temperature: -10 ℃~60 ℃; Working humidity: 5%~95% relative humidity, no condensation
BIOS	AMI BIOS， Support timed startup and intelligent recognition of remote power on/off devices
Watch Dog	Watchdog programming, supports hardware reset function (256 levels, 0-255 seconds)
Operating system	Supports Windows 11, Windows 10, Linux, etc