ELSKY KC7000 Domestic Zhaoxin Indutrial Motherboard
Dual network ports
| Motherboard size | 170mm*170mm * 28mm (thickness with fan) | |||||
| CPU | Supports domestic Zhaoxin KX-7000 octa-core 3.5GHz processor. | |||||
| Power supply | 1*DC_ IN | The DC connector has an inner diameter of 2.5mm and supports 12V /19V.
The motherboard consumes approximately 60W under full load ; a 12V 7A or 19V 5A or higher power supply is recommended. |
||||
| 1*DC_ATX (4-pin) | ||||||
| Memory | 2*SO DIMM slots | NB-DDR4 memory , with a maximum frequency of 3200 MHz and a maximum capacity of 64 GB. | ||||
| Network function | 1/2*LAN interface | Single network: Default support for domestic Yutaiwei YT6801 gigabit network card;
Optional support for Realtek 8111H Gigabit Ethernet adapter; Dual-network support: Supports domestic YT6801 gigabit network card + YT6801 gigabit network card; Optional support for Realtek 8111H Gigabit Ethernet adapter + Realtek 8111H Gigabit Ethernet adapter; Supports Wake-on-LAN and PXE diskless boot functionality. |
||||
| 1*CN1 interface | Supports Key-B interface M.2 5G (3052/3042) modules or M.2 4G (3042) modules. | |||||
| By default, the M.2 4G/5G has no signal and requires hardware modification. After modification, pins 11-19 of the built-in USB3_5G will have no signal, whereas the built-in USB3_5G will have a full signal by default. | ||||||
| 1*M.2 WiFi interface | Supports Key-E interface M.2 2230 PCIe 4.0 x1 & USB, and supports WiFi and Bluetooth modules. | |||||
| Display function | Graphics card | Integrated C-1190 graphics card, supporting single display, dual/triple display duplication, and dual/triple display expansion.
(Supports HDMI1/HDMI_CON header + VGA + LVDS/EDP triple display; does not support HDMI1/HDMI_CON header + HDMI2 + LVDS/EDP triple display, does not support HDMI2 + LVDS/EDP dual display, LVDS/EDP/HDMI2 signal selection is required) |
||||
| 1*HDMI1® 2.0 port | Supports 4K resolution 4096/3840*2160@60Hz | |||||
| 1*HDMI_CON header | Supports 2K resolution 1920*1080@60Hz | |||||
| 1*VGA DB15 interface | Supports resolution 1920*1080@60Hz | |||||
| 1*HDMI2® 2.0 port (optional) | Supports 4K resolution 4096/3840*2160@60Hz | |||||
| Choose between VGA and HDMI2® interfaces . | ||||||
| 1*LVDS 1 pin | Supports resolution 1920*1080@60Hz ( 30Pin, 2*15Pin, 2.0mm) | |||||
| 1*EDP1 pin (optional) | EDP-C screen cable, supports 4K resolution 4096/3840*2160@30Hz
(30Pin, 2*15Pin, 2.0mm) |
|||||
| offers a choice between LVDS/EDP/HDMI2® signals , with LVDS headers supported by default. | ||||||
| 1*EDP_PWR 1 pin | EDP working voltage control pin (6-pin, 2*3-pin, 2.0mm) | |||||
| 1*LVDS_PWR 1 pin | LVDS operating voltage control pin (6-pin, 2*3-pin, 2.0mm) | |||||
| 1*BKLT_CTRL pin | LVDS brightness adjustment pin (4 Pin, 1* 4 Pin, 2.0mm) | |||||
| 1*INVERT pin | LVDS backlight control pins (6-pin, 1*6-pin, 2.0mm) | |||||
| USB function | 2 USB 3.0 ports | Rear standard USB 3.0 port | ||||
| 2 USB 2.0 ports | Rear standard USB 2.0 port (this port is not available on 2*LAN motherboards ) | |||||
| 1*F_USB 1-pin connector | Front-mounted USB 2.0 header, one set has 2 USB 2.0 ports.
(9-pin, 2*5-pin, 2.54mm) |
|||||
| 1*F_USB2 pin | Front-mounted USB 2.0 header, one set has 2 USB 2.0 ports.
(9-pin, 2*5-pin, 2.54mm) |
|||||
| 1*F_USB 3-pin connector | Front-mounted USB 2.0 header, one set has 2 USB 2.0 ports. (9-pin, 2*5-pin, 2.0 mm ) | |||||
| The F_USB3 pin has no signal by default and can only be used with an external USB 2.0 interface; after switching to dual-network mode, the F_USB3 pin will have a signal (hardware modification required). | ||||||
| 1*USB 3_5G header | Front-mounted USB 3.0 header, one set has 2 USB 3.0 ports ( 19-pin, 2 x 10-pin, 2.0mm). | |||||
| The built-in USB 3.5G port has a full signal by default; after switching to support M.2 4G/5G, pins 11-19 of the built-in USB 3.5G port have no signal. | ||||||
| Sound function | The Realtek ALC 897 HD digital audio controller is supported by default ; optional support is available for the integrated Senary SN6186 sound card. | |||||
| 1*LINE_OUT interface | Supports audio output (green) | |||||
| 1*MIC_IN interface | Microphone input is supported (red). | |||||
| 1* INT_SPK pin | Supports 8 ohms 5 watt speaker output (amplifier) (4-pin, 1*4-pin, 2.0mm) | |||||
| Hard drive function | 1* M.2-SATA/PCIe interface | Supports Key-M interface M.2 2280 NVME PCIe 4.0 x2 / SATA adaptive standard SSD; | ||||
| 1*SATA1 interface | Standard SATA hard drive interface, supports SATA 3.0 | |||||
| 1*SATA_PWR header | The hard drive power supply pins can draw 5V or 12V power.
(4-pin, 1*4-pin, 2.54mm) |
|||||
| On/off function | 1*F_PANEL pin | Switch, power indicator, hard drive indicator, reset pin (9-pin, 2*5-pin, 2.54mm) | ||||
| 1*AUTO_SW pin | Hardware control power-on pins (3-pin, 1*3-pin, 2.0mm) | |||||
| Other I/O | 1*COM1 pin | Supports standard RS232 , with optional support for RS422/RS485
(9-pin, 2*5-pin, 2.54mm). |
||||
| 1*COM2 pin | Supports standard RS232 (9-pin, 2*5-pin, 2.54mm) | |||||
| 1*COM3~6 pins | Supports standard RS232 (39Pin, 2*20Pin, 2.0mm). | |||||
| 1*JCOM1/2 pins | The voltage at pin 9 of COM1/2 is selectable: 0V/5V/12V.
(6-pin, 2*3-pin, 2.0mm) |
|||||
| 1* M SIM card slot | Supports SIM cards; a SIM card is required when using 5G /4G. | |||||
| 1*CLR_CMOS pin | Motherboard reset and discharge pins (3-pin, 1*3-pin, 2.0 mm ) | |||||
| 1*CPU_FAN pin | CPU fan header , supports temperature control
(3-pin, 1*3-pin, 2.54mm) |
|||||
| 1*SYS_FAN pin | SYS fan header , full speed (3-pin, 1*3-pin, 2.54mm) | |||||
| 1*GPIO 1 pin | GPIO control pins (10Pin, 2*5Pin, 2. 0 mm) | |||||
| 1 PCI-E x16 interface (optional) | Supports PCIe 4.0 x8 signal, and supports discrete graphics cards and PCIe devices. | |||||
| 1*J5 pin | Debugging pins ( 3-pin, 1*3-pin, 2.0 mm ) | |||||
| 1*VRH1 pin | Debugging pins ( 3-pin, 1*3-pin, 2.54mm ) | |||||
| 1*DB_CN1 pin | Adjustment pins ( 10-pin, 2*5-pin, 2.0 mm ) | |||||
| Operating environment | Operating temperature: 0℃~60℃;
Operating humidity: 5%~95% relative humidity, non-condensing. |
|||||
| BIOS | Supports power-on upon startup, scheduled power-on, and intelligent identification of remote power on/off devices. | |||||
| Operating system | Supports Windows 1.1, Windows 1.0 , Linux , and domestic operating systems . | |||||
Product Overview
The motherboard utilizes industrial-grade components and a wide-temperature design, supporting operation in environments ranging from -10°C to 60°C and ensuring stable, continuous 24/7 performance; it is widely used in IoT sectors such as industrial automation, machine vision, smart commercial displays, and medical imaging.
Core Advantages
Industrial Automation
Production Line Control, Equipment Monitoring, Data Acquisition
Machine Vision
AI Visual Inspection, Image Recognition and Analysis
Smart Commercial Displays
Digital Signage, Advertising Displays, Information Dissemination Terminals
Medical Imaging
Medical Imaging Terminals And Diagnostic Equipment
Smart Transportation
Traffic Signal Control And Road Network Monitoring
IoT Gateway
Data Aggregation And Edge Computing Nodes
