ELSKY LC3500 Domestic Loongson LS3A5000 Indutrial Motherboard
Dual Network Ports
| Motherboard size | 170mm*170mm*33mm | |
| CPU | Supports domestically produced Loongson LS3A5000-HV and LS3A5000-LL processors. | |
| Chipset | Loongson 7A2000 | |
| Power supply | 1*DC_ IN | The DC connector has an inner diameter of 2.5mm and supports 12V /19V.
The motherboard consumes approximately 60W under full load; a 12V 7A or 19V 4A or higher power supply is recommended. |
| 1*DC_ATX (4-pin) | ||
| Memory | 2*SO DIMM slots | NB-DDR4 memory , maximum frequency supported 3200MHz , maximum capacity supported 64GB |
| Network function | 1/2*LAN interface | Single network: Default support for domestic Yutaiwei YT6801 gigabit network card;
Optional support for Realtek 8111H Gigabit Ethernet adapter; Dual-network support: Supports domestic YT6801 gigabit network card + YT6801 gigabit network card; Optional support for Realtek 8111H Gigabit Ethernet adapter + Realtek 8111H Gigabit Ethernet adapter; Supports Wake-on-LAN and PXE diskless boot functionality. |
| 1*M.2_WiFi interface | Supports Key-E interface M.2 2230 PCIe 3.0 x1 & USB, and supports WiFi and Bluetooth modules. | |
| Display function | graphics card | Integrated Loongson core graphics card with 1Gb video memory, supporting single display, dual/triple display duplication, and dual display expansion. |
| 1*HDMI® 1.4 port | Supports 2K resolution 1920*1080@60Hz | |
| 1*VGA DB15 interface | Supports resolution 1920*1080@60Hz | |
| 1*LVDS 1 pin | Supports resolution 1920*1080@60Hz ( 30Pin, 2*15Pin, 2.0mm) | |
| 1*LVDS_PWR 1 pin | LVDS operating voltage control pin (6-pin, 2*3-pin, 2.0mm) | |
| 1*INVERT pin | LVDS backlight control pins (6-pin, 1*6-pin, 2.0mm) | |
| The motherboard uses the same VGA/LVDS signal, supports simultaneous display, but does not support different displays. Simultaneous display requires the VGA and LVDS screens to have the same resolution parameters; the LVDS pins cannot be modified and support EDP. | ||
| 1 PCI-E X16 slot | Supports PCIe 3.0 x8 signal , can connect to discrete graphics cards and PCI-E devices. | |
| USB function | 6 USB 3.0 ports | Rear standard USB 3.0 port |
| 1*F_USB 1-pin connector | Front-mounted USB 2.0 header, one set has 2 USB 2.0 ports.
(9-pin, 2*5-pin, 2.0 mm ) |
|
| 1*F_USB2 pin | Front-mounted USB 2.0 header, one set has 2 USB 2.0 ports.
(9-pin, 2*5-pin, 2.0 mm ) |
|
| 1*F_USB3_A connector | Front-mounted USB 3.0 header, one set has 2 USB 3.0 ports
(19-pin, 2 x 10-pin, 2.0mm ) . |
|
| Sound function | The Senary SN6186 integrated sound card is supported by default ; optional support is available for the Realtek ALC 897 HD digital audio controller. | |
| 1*LINE_OUT interface | Supports audio output (green) | |
| 1*MIC_IN interface | Microphone input is supported (red). | |
| 1*INT_SPK pin | Supports 8 ohms 5 watt speaker output (amplifier)
(4-pin, 1*4-pin, 2.0mm) |
|
| 1*F_AUDIO pin | Standard audio pins (9-pin, 2*5-pin, 2.54mm) | |
| Hard drive function | 1*NGFF interface | Supports Key-M interface M.2 2280 NVMe PCIe 3.0 x4 / SATA dual-protocol adaptive standard SSD |
| 1*SATA1 interface | Standard SATA hard drive interface, supports SATA 3.0 | |
| 1*SATA_PWR header | The hard drive power supply pins can draw 5V or 12V power.
(4-pin, 1*4-pin, 2.54mm) |
|
| On/off function | 1*F_PANEL pin | Switch, power indicator, hard drive indicator, reset pin
(9-pin, 2*5-pin, 2.54mm) |
| 1*AUTO_SW pin | Hardware control power-on pins (3-pin, 1*3-pin, 2.0mm) | |
| Other I/O | 1*COM1 pin | Supports standard RS232 /RS485 optional (9-pin, 2*5-pin, 2.0 mm ) |
| 1*COM2 pin | Supports standard RS232 (9-pin, 2*5-pin, 2.0 mm ) | |
| 1*COM3~6 pins | Supports standard RS232 (39Pin, 2*20Pin, 2.0mm). | |
| 1*JCOM1 pin | COM1 pin 9 is set to 0V/5V/12V (6-pin, 2*3-pin, 2.0mm) | |
| 1 * CPU_FAN 1 pin | CPU fan header , supports temperature control (4 Pin, 1* 4 Pin, 2.54mm) | |
| 1 *FAN 2 pins | Chipset fan header , full speed (3-pin, 1*3-pin, 2.54mm) | |
| 1*VCORE_DEG1 pin | Nuclear power chip debugging or firmware burning (3Pin, 1*3Pin, 2.54mm) | |
| 1*CPU_DEBUG pin | Debugging pins ( 3-pin, 1*3-pin, 2.0 mm ) | |
| Operating environment | Operating temperature: 0℃~60℃;
Operating humidity: 5%~95% relative humidity, non-condensing. |
|
| BIOS | Supports power-on upon startup, scheduled power-on, and intelligent identification of remote power on/off devices. | |
| Operating system | Supports Loongson processors . Domestic operating systems such as Kylin and UOS | |
Product Overview
The motherboard utilizes industrial-grade components and a wide-temperature design, supporting operation in environments ranging from -10°C to 60°C and ensuring stable, continuous 24/7 performance; it is widely used in IoT sectors such as industrial automation, machine vision, smart commercial displays, and medical imaging.
Core Advantages
Industrial Automation
Production Line Control, Equipment Monitoring, Data Acquisition
Machine Vision
AI Visual Inspection, Image Recognition and Analysis
Smart Commercial Displays
Digital Signage, Advertising Displays, Information Dissemination Terminals
Medical Imaging
Medical Imaging Terminals And Diagnostic Equipment
Smart Transportation
Traffic Signal Control And Road Network Monitoring
IoT Gateway
Data Aggregation And Edge Computing Nodes