Name: ELSKY M100F N95 N97 N100 N305 Industrial Motherboard
Brand: SHENZHEN ELSKY TECHNOLOGY CO.,LTD

Model

CPU

COM

4K

LAN

USB2.0

USB3.2

SSD

Memory

Power

M100F

Support Intel® Alder Lake-N series N200, N100,N97,N95, i3-N305, etc

6C/2C/10C

optional

√

1

6

2

1*M.2

1*SATA

1*NB-DDR4

MAX 16G

+12V

M150F

Support Intel ® Twin Lake series N150, N250, i3-N350, i3-N335, etc

2

4

2

Size	170mm(L)170mm(W)22mm(H)
CPU	M100F supports Intel ® Alder Lake-N series N200, N100, N97, N95, i3-N305, etc M150F supports Intel ® Twin Lake series N150, N250, i3-N350, i3-N335, etc
Memory	1*NB-DDR4 SODIMM memory slot, supports single channel 3200MHz memory, low voltage 1.2V, maximum support 16GB
Power supply	1*DC_JACK	Supports 12V voltage, with a DC head inner diameter of 2.5mm The motherboard has a full load power consumption of approximately 30W. It is recommended to use a 12V/4A or higher power supply
Power supply	1*DC_PWR（4Pin）
Display function	Intel® UHD Graphics,support single display, dual display/triple display replication, dual display/triple display expansion
	1*VGA DB15 port	Support resolution 1920*1080@60Hz
	1*DP 1.4 port (optional)	DP does not support DP++,support 4K resolution 4096/3840*2160@60Hz
	VGA interface can be modified to support DP 1.4 interface
	1*HDMI® 2.0 port	4K resolution 4096/3840*2160@60Hz
	1*HDMI_CON pin	4K resolution 4096/38402160@60Hz （16Pin，28Pin，2.0mm）
	1*LVDS/EDP1 pin	Support resolution 19201080@60Hz （30Pin，215Pin，2.0mm）
	LVDS and EDP1 are optional and share pins. EDP1 does not support 4K resolution and uses EDP-B screen cable
	1*VCC_SEL pin	LVDS/EDP1 voltage control pin （6Pin，2*3Pin，2.0mm）
	1*BKLT_CONN pin	LVDS/EDP1 backlight switch control pin （6Pin，1*6Pin，2.0mm）
	1*EDP2 pin	Use EDP-A screen cable,support resolution19201080@60Hz （30Pin，215Pin，2.0mm）
Network function	1/2*RJ45 LAN port	Single network: default Realtek 8111H Gigabit Ethernet card; Optional Motorcomm YT6801 Gigabit Ethernet Card; Dual network: supports Realtek 8111H+Realtek 8111H Gigabit Ethernet cards; Optional Motorcomm YT6801+Motorcomm YT6801 Gigabit Network Card; Support network wake-up and PXE diskless boot function
Network function	1*M2_WIFI port	Support Key-E interface M.2 2230 PCIE3.0 x1 & USB,support WiFi Bluetooth module;
Hard disk function	1*SATA port	Standard SATA 3.0 hard drive interface
	1*NGFF(M.2) port	Support Key-M interface M.2 2280 NVME PCIE3.0 x2 / SATA dual protocol adaptive standard SSD; Optional M.2 2242 hard drive;
	1*SATA_PWR pin	Hard drive power supply pin, capable of supplying 5V and 12V power （4Pin，1*4Pin，2.54mm）
Sound function	Default support for Realtek ALC897 HD digital audio decoder and 6-channel high fidelity audio controller
	1*LINE_OUT port	Supports audio output (green)
	1*MIC_IN port	Supports microphone input (red)
	1*JAMP pin	The amplifier supports dual channel output with 8 ohms and 5 watts speakers （4Pin，1*4Pin，2.0mm）
	1*F_AUDIO pin	Standard audio pin （9Pin，2*5Pin，2.54mm）
USB function	2*USB3.2 port	Rear standard USB 3.2 Gen1 interface, with a maximum transmission bandwidth of 5Gbps
	2*USB2.0 port	Rear standard USB 2.0 interface, with a maximum transmission bandwidth of 480Mbps
	1*F_USB1 pin	Front USB 2.0 pins, one set with 2USB 2.0 （9Pin，25Pin，2.54mm）
	1*F_USB2 pin	Front USB 2.0 pins, one set with 2USB 2.0 （9Pin，25Pin，2.54mm）
Switch function	1*F_PANEL pin	Switch, power light, hard disk light, restart pin （9Pin，2*5Pin，2.54mm）
Switch function	1*JATX pin	Support hardware control for power on and startup（3Pin，1*3Pin，2.0mm）
Other I/O	COM1～6 pin	Serial port, supports RS232 by default （9Pin，2*5Pin，2.54mm）
	COM7~10 pin (optional)	Serial port, supports RS232 by default （3Pin，1*3Pin，2.0mm）
	COM3/4 pin	Serial port, optional support RS232/422/485 （9Pin，2*5Pin，2.54mm）
	COM2/6 pin	Serial port, optional support RS232/485 （9Pin，2*5Pin，2.54mm）
	1*JPCOM1/2 pin	Can control the ninth pin voltage of COM1/2 to 0V/5V/12V （6Pin，2*3Pin，2.0mm）
	All serial ports can be hardware modified and support TTL
	1*JLPT pin	Parallel port, standard printing interface pins （25Pin，2*13Pin，2.0mm）
	1*CLR_CMOS pin	Motherboard reset and discharge pins （2Pin，1*2Pin，2.54mm）
	1*FAN1 pin	CPU fan pin, default does not support temperature control; Adjustable hardware supports temperature control （3Pin，1*3Pin，2.54mm）
	1*FAN2 pin	Default no pins; System fan pin, does not support temperature control （3Pin，1*3Pin，2.54mm）
	1*GPIO_CN pin	GPIO control pin （10Pin，2*5Pin，2.0mm）
	1*J1 pin	Debugging pins （10Pin，2*5Pin，2.0mm）
Operating environment	Working temperature: -10 ℃~60 ℃; Working humidity: 5%~95% relative humidity, no condensation
BIOS	AMI BIOS,support timed startup and intelligent recognition of remote power on/off devices
Watch Dog	Watchdog programming, supports hardware reset function (256 levels, 0-255 seconds)
Operating system	Windows 11, Windows 10, Linux,etc (N100 and i3-N300 support Windows 10, Windows 11 22H2 and above versions)

Product Overview

The motherboard utilizes industrial-grade components and a wide-temperature design, supporting operation in environments ranging from -10°C to 60°C. It is capable of stable, 24/7 continuous operation and is widely applied across various IoT sectors, including industrial automation, machine vision, smart commercial displays, and medical imaging.